Leaflet (.pdf 1,11 MB) | Movie (.wmv 27,52 MB) | Photo Gallery | Poster (.jpg 1,28 MB) |
Field of use
The equipment is intended to mean volume digging-loading works, on the fields having specific resistance to digging up to 3,6 daN/cm², and a max. 1800kg/ m³ volumic weight in natural state.
Possibility of being equipped with a various range of interchangeable attachments (buckets for channels shaping and cleaning, grabs for digging and loading, grapples with jaws and petals, scarifying tooth, hydraulic hammer) grant excavator a wide area of use.
Description
The excavator consists of a substructure, movable car on tyres and a superstructure, a 360° slewing platform against the undercarriage, the work equipment being joint vertically mounted on the platform.
Travelling, platform slewing, digging equipment drive is hydraulic.
Main operation parameters are permanently shown on a display. The excavator has three operating modes so that the operator may select the optimum operating mode based upon the purpose of work.
Heat engine
Brand :                                            
Power :
Noxiuos emission :
 PERKINS 1104C - E44TA;
97 kW / 2200 rev/min;
as per European Directive 97/68; Stage 2.
Hydraulic system
Type :
Hydraulic pumps :
Max. flow :
Max. pressure :
 Close centre type, with pump de-tilting at maximum adjusted pressure, with electronic control and power regulator;
2 REXROTH pumps with variable flow;
2x164 l/min;
300 bar.
Technical features
Operating weight :
- 2 pressing-on points :
- 2 pressing-on points and blade :
Travelling speed :
Standard bucket capacity :
Max. outreach :
Digging depth :
Max. operational height :
16,7 t;
17,6 t;
20 Km/h;
0,7 m³
8,5 m;
4,5 m;
7,5 m.
Other optional equipment
Equipment designation
Channels cleaning bucket
Channels shaping bucket
Draining buckets
Argillo ground buckets
Grab
Grapple
Special loading equipment 		Capacity m³ (ISO-SAE)
0,3-0,6
1,0
0,19
0,13-0,22
0,38-0,75
0,4-0,6
0,6-1,1		 Width mm
1500-2000
-
400
360-520
600-1200
-
1200-1500      
Certificate of Conformity as per Machinery European Directive 98 / 37.
Working diagram
Site map | Search